Airtouch Brush

A Beautifully Blended, Flawless Application Less Time • Less Makeup

Tips for how to use your AirTouch™ Rotating Brush


Important Safety Instructions

  • Use this product only for its intended use as described in this manual.
  • Do not allow children to use the product.
  • If any part of the Airtouch™ Rotating Brush appears to be damaged or malfunctioning, discontinue use immediately
  • Keep hair away from face using a band or tie during use.
See all the included parts within Airtouch™ Rotating Brush

Battery Installation

How to install the battery

Ensure ON/OFF Switch is slide back to the OFF position. Unscrew the bottom cap counterclockwise. Insert the (CR123A) battery according to the polarity direction shown. Screw the cap on the clockwise without overtightening. Replace the battery when the brush rotation slows down or stops working. Only use CR123A.


Attaching Brush Heads

Attaching brush heads

Ensure ON/OFF Switch is slide back to the OFF position. Align the brush head into the end of the Power handle, push until you hear it click into position. To remove the brush head, simply pull the brush head off and press on the other head until it clicks into position.


Using Liquid Makeup

Steps for using liquid makeup

APPLY: Important, keep hair away from your face using a band or hair tie. Dot your face with liquid or cream makeup. Only a small amount is required.

DO NOT pour liquid make up onto the brush head.

Turn the brush ON. Glide the brush slowly around your face in the direction shown for each area. Use a lightpressure with side to side or up and down motion. DO NOT use a circular motion. Avoid your lips, hairline, and eyes. Continue until blended evenly.


Using with Powder Makeup

Ensure the unit is powdered off. Lightly pat the brush head directly into the powder makeup. Blend makeup using light pressure with side to side or up and down motion. DO NOT use a circular motion.


Cleaning your Airtouch™ Rotating Brush

Airtouch Rotating Power Handle:

  • Ensure unit is powered off.
  • Remove Brush Head from Airtouch Rotating Power Handle.
  • Clean the outside of the unit with a soft, dry cloth. Do not use abrasive or liquids to avoid damage to the product.

Airtouch Rotating Brush Head:

  • Ensure unit is powered off.
  • Remove Brush Head from Airtouch Rotating Power Handle.
  • Clean Brush Head using mild soap and rinse with warm water. Lay them on their side to dry.

Battery Replacement

As lithium batteries lose power, they may fail abruptly. If your brush stops working, make sure the bottom cap is on securely. If that doesn’t solve the problem and your burhs is running slow or not working, the battery needs to be replaced. Follow the Battery Installation instructions. Dispose of the old battery following regulations in your area. Only replace with a lithium non-rechargeable CR123A 3V battery.

Battery Warnings


AirTouch™ Brush